Then there is the Puget Sound winter. Sheltered compared with the Narrows bluff, but the December 2022 and January 2024 freezes still split hose bibs and garage water heater lines in the older homes. Winter rain overloads the oldest cast iron and clay drains. From our shop in Port Orchard, Fircrest is about 35 minutes from Port Orchard, over the Narrows Bridge and a few minutes down Highway 16 to the Orchard Street exit; we schedule it alongside nearby stops so windows stay tight.
Why faucet repair & installation is a little different in Fircrest
Older Fircrest homes often have original two-handle compression faucets and multi-turn angle stops that have not moved in decades. We rebuild the stems where the faucet is worth it and replace the stops with quarter-turn valves so the next shutoff actually shuts off.
What is behind the drywall in Fircrest matters more than most people expect. Platted in the 1920s as a planned garden suburb around the golf course, so the oldest streets have 1920s and 30s Tudor and Colonial homes with basements, cast iron and galvanized. Most of the rest filled in between 1945 and 1970 with brick ramblers and split-levels on copper and cast iron. Very little new construction; the plumbing is old and the houses are well kept.
Local conditions that affect faucet repair & installation in Fircrest
The pattern we see most in Fircrest is this: Cast iron drains in the brick ramblers channeling after sixty years
Stone and quartz vanity tops are common in Fircrest remodels, and a widespread faucet on stone needs its underside connections lined up with care so the handles sit square. It is slower work and we allow for it rather than rushing it.
Local conditions shape the work. In Fircrest: Clay side sewers with roots from the big street trees on Regents and Alameda
For Fircrest rentals and vacation homes, a faucet that drips between visits can run up a water bill or, on a well, overwork the pump. We can swap worn faucets and supplies in every bathroom on one trip and leave you with a clear invoice.
Signs Fircrest homeowners call us for faucet repair & installation
Worth a call
- Water in the cabinet under the sink, especially near the supply connections
- The finish is flaking, pitted or green around the base
- A pulldown spray head that will not retract or dock
- Hot and cold are reversed, or the hot side barely flows
- The shutoff valves under the sink are seized or drip when turned
How we handle faucet repair & installation in Fircrest
For faucet repair & installation in Fircrest the order of operations is tell us what it is doing, check the faucet and under the sink, flat price approved by you, repair or install, then flush, test and dry-check. That sequence keeps the work predictable and the price honest.
Read the full step-by-step for faucet repair & installation →
Fircrest neighborhoods and areas we serve
Call from Fircrest Golf Club area, Regents Boulevard and the original 1920s plat or anywhere else in Fircrest, including the places near Regents Boulevard median and Thelma Gilmur Park that other outfits treat as a long drive.
Faucet Repair & Installation questions from Fircrest
What does faucet repair cost in Fircrest?
A cartridge, stem or aerator repair is a modest service call plus the part. Replacement is quoted with labor, supplies and any shutoff valves listed. The price is flat and approved before work starts.
How soon can you repair a faucet in Fircrest?
Most Fircrest faucet calls are scheduled same-day or next-day with a four-hour window and a text when the plumber is on the way. A faucet that will not shut off is treated as urgent.
Do you carry faucet parts, or will you need to come back?
We carry Moen, Delta and Kohler cartridges, stems, seats, aerators and supply lines on the truck. Most Fircrest repairs are finished on the first visit.
Can you install a faucet I bought for my Fircrest home?
Yes. Call first and we will confirm it fits your sink's hole count and spacing. The labor price is the same whether you supply the faucet or we do.
Why is my faucet leaking under the sink?
Usually the supply line connections or the shutoff valves, not the faucet itself. Old plastic or rubber supply lines and original multi-turn stops are the common culprits. We replace both with braided stainless supplies and quarter-turn valves.
We bring the same equipment to Fircrest that we use at home in Kitsap: sectional and drum machines, a push camera with a monitor, our own hydro jetting truck, and a van stocked for the common repairs.