Digging and draining in Steilacoom depend on the soil. A steep bluff of glacial drift dropping to Puget Sound, with the historic town on the slope and the beach, Chambers Creek Canyon to the north, and the flat prairie behind. Bluff lots have long, steep drain runs and groundwater seeps in the slope. At about 50 minutes from Port Orchard, over the Narrows Bridge, through University Place and down to the waterfront from Port Orchard, Steilacoom is a regular line on our schedule, not a special trip.
Why faucet repair & installation is a little different in Steilacoom
Newer tract homes in Steilacoom tend to come with builder-grade faucets whose cartridges are hard to source and not worth the price when they are. For those we usually recommend a quality replacement over a repair, and we tell you which it is before quoting.
It helps to know who delivers the water. Lakewood Water District supplies Steilacoom from its deep wells, under agreement with the town. The water is groundwater and harder than Tacoma's river supply.
Local conditions that affect faucet repair & installation in Steilacoom
Here is a Steilacoom detail that changes how we approach the job: Galvanized and cast iron in historic district homes
High water pressure in some Steilacoom neighborhoods hammers faucet cartridges and supply lines. If we see pressure above normal on the gauge we will mention it, because the faucet is just the first fixture to complain and the washing machine hoses are next.
The pattern we see most in Steilacoom is this: Crawlspace freezes on southwest-facing waterfront homes
Well water in parts of Steilacoom carries enough iron and grit to score ceramic discs and seize cartridges in their bodies. We bring cartridge pullers for that, and if a faucet has been rebuilt twice in a few years we will mention a sediment filter rather than just sell another cartridge.
Signs Steilacoom homeowners call us for faucet repair & installation
Worth a call
- Water weeping from the base of the handle when the faucet runs
- A weak or sideways stream that a new aerator does not fix
- The faucet handle is stiff, loose or has to be held in just the right spot
- Water in the cabinet under the sink, especially near the supply connections
- The finish is flaking, pitted or green around the base
How we handle faucet repair & installation in Steilacoom
Here is how it runs when we come to Steilacoom for faucet repair & installation: tell us what it is doing, check the faucet and under the sink, flat price approved by you, repair or install, then flush, test and dry-check. Nothing is started until you have approved a flat price.
Read the full step-by-step for faucet repair & installation →
Steilacoom neighborhoods and areas we serve
From Hillside above the ferry landing to Pioneer Orchard and Union Avenue, with plenty of stops around Chambers Bay and Fort Steilacoom site and Western State Hospital, Steilacoom is well-worn ground for our trucks.
Faucet Repair & Installation questions from Steilacoom
How soon can you repair a faucet in Steilacoom?
Most Steilacoom faucet calls are scheduled same-day or next-day with a four-hour window and a text when the plumber is on the way. A faucet that will not shut off is treated as urgent.
Do you carry faucet parts, or will you need to come back?
We carry Moen, Delta and Kohler cartridges, stems, seats, aerators and supply lines on the truck. Most Steilacoom repairs are finished on the first visit.
Can you install a faucet I bought for my Steilacoom home?
Yes. Call first and we will confirm it fits your sink's hole count and spacing. The labor price is the same whether you supply the faucet or we do.
Will you replace the shutoff valves under my Steilacoom sink?
If they are old or stiff, yes, and we recommend it while the cabinet is open. Quarter-turn stops are inexpensive and prevent the next leak.
Is it worth repairing a dripping faucet or should I replace it?
If the faucet is a name brand with available parts and the body and finish are sound, repair is cheaper and lasts years. If it is a builder-grade faucet with no cartridge available, or the finish and body are shot, replacement is the better value. We give you our honest read before you decide.
We bring the same equipment to Steilacoom that we use at home in Kitsap: sectional and drum machines, a push camera with a monitor, our own hydro jetting truck, and a van stocked for the common repairs.