It helps to know who delivers the water. Kitsap PUD serves most of Hansville through a system that is now linked with Kingston and Gamblewood. Some outlying properties toward Eglon and on the Hood Canal side are on private wells. It is a little over an hour from Port Orchard, the longest drive we make inside Kitsap County to Hansville, a run we make often enough to know the roads, the water districts and the quirks of the housing.
Why well house & pressure tank service is a little different in Hansville
Homes in Hansville on a hill above the well house or at the end of a long supply line can have a healthy pump and still poor pressure at the shower. Before anyone talks about a bigger pump we check the switch settings, the tank size and the pipe, and we will suggest a booster after the tank if that is the right answer.
Where the drains end up matters just as much. There is no public sewer in Hansville. The whole community, including Driftwood Key and the waterfront around Point No Point, is on septic, much of it older systems on small lots where effluent pumps and tight drainfields are the norm.
Local conditions that affect well house & pressure tank service in Hansville
Ask a Hansville homeowner what goes wrong with plumbing here and you will usually hear a version of this: Sump pumps and crawlspace groundwater on the low spit at Point No Point
Many Hansville wells are shallow and sit close to septic drainfields and neighbors' wells, so the water table drops in late summer and the pressure tank works harder. If your gauge swings faster in August than it did in March, the tank's air charge is worth checking before the pump pays for it.
Here is a Hansville detail that changes how we approach the job: Extended outages stopping septic pumps, wells and sump pumps at once
Older cabins and homes in Hansville often have a well house that was plumbed decades ago and patched one fitting at a time ever since. We rebuild the manifold as one job, with unions and ball valves so the tank can be isolated without draining the house.
Signs Hansville homeowners call us for well house & pressure tank service
Worth a call
- Rust streaks, a weeping relief valve or a pinhole on the tank or tank tee
- The gauge in the well house is stuck, fogged or reads nothing
- Lines in the well house froze last winter and the building has no heat
- The well house plumbing is a patchwork of old fittings and valves that no longer close
- The pump clicks on and off rapidly whenever a faucet is running
How we handle well house & pressure tank service in Hansville
Our well house & pressure tank service process in Hansville is tell corinne what the system is doing, diagnose at the well house, flat price on your phone, replace the cluster, not just the part, run it through its cycles, then winter and maintenance advice, with the written price coming before any tool is picked up.
Read the full step-by-step for well house & pressure tank service →
Hansville neighborhoods and areas we serve
We have worked in Shore Woods, in Point No Point and most of the Hansville neighborhoods in between, including the homes out by Foulweather Bluff Preserve and Hansville Greenway trails.
Well House & Pressure Tank Service questions from Hansville
Is there a charge to diagnose a well house problem in Hansville?
Diagnosis is part of the flat-rate quote, and you approve the price before any repair. If the fix is a breaker or a quick reset, you will not be charged for a tank you did not need, and if it is the pump, you get a referral rather than a bill.
Do you repair well houses in Hansville?
Yes. We service pressure tanks, pressure switches, gauges, check valves, filtration and the supply line for wells across Kitsap County, including Hansville. Pulling or replacing the pump itself is well pump company work, and we will tell you when that is what you need.
How fast can you get to Hansville for no water?
No-water calls are prioritized, with evening and weekend availability. We give you a four-hour window and a text when the plumber is on the way. Reset the well breaker once before you call; if it holds and you still have no water, we are on our way.
My Hansville well house froze. Can you fix the plumbing?
Yes. We repair split lines, replace cracked tanks, tees and switches, and insulate and heat the building so it does not happen again next winter.
How do I know if my pressure tank is bad?
Tap it from top to bottom. A good tank sounds hollow above the waterline and dull below. A bad one sounds dull everywhere. With the pump off and the system drained, the air valve on top should hold pressure; if water comes out of it, the bladder is torn.
We have cleared drains, swapped water heaters and dug up water lines in nearly every corner of Kitsap County. Hansville is a short drive for us, which is why most calls there land same-day or next-day.